Senin, 15 Maret 2010

PANAS!!!!


panaaaaaaas. kata yang cukup untuk mewakili hari ini. hari in panas nya gila bangeet. gue pulang sekolah pas jalan di korodor labs aja langsung keringet bercucuran (lebay). tapi emang panas banget.

pas masuk mobil udah lumayan deh, langsung gue pol in acnya. tapi tetep aja ga terlalu ngaruh. sampe rumah gue langsung mandi. dan abis mandi itu rasanya segeeeeeer banget. udah kayak surga dunia. langsung fresh getoo. trus abis mandi makan dan setelah itu tidur. nikamat bangeet. 

kartu nama


berkaitan sama tugas smp labschool jakarta kelas 9, maka gue bikin kartu nama seperti di atas. maaf ya kalo gambarnya sederhana banget, soalnya waktu itu gue bikinnya buru-buru banget pas do sekiolah, jado gitu deh.

Minggu, 07 Maret 2010

minggu-minggu melelahkan

smlekuuum. 3 minggu yang lalu berturut-turut tu bener-bener nyapein ya. minggu pertama kita ada TO, tapi gue lupa TO apaan. trus minggu kedua TO lagi, trus kemaren baru aja selesai UAS semester 2. tapi materinya dari kelas 7. tapi untung guru-guru labschool baik juga, kalo pada ga ngasih rangkuman bingung banget deh mau belajar darimana. 

hari jumat kemaren abis pm gue rasanya legaa bgt. kayaknya bener-bener males gitu mau ngapa-ngapain, mau nya tidur aja deh. tapi kelas gue tuh masih ketinggalan banget. kelas 9d masih ada 4 ulangan yang menunggu di minggu berikutnya. hari senin : biologi, geografi. selasa : sejarah. rabu : ulangan praktek kjp.zzzzzz

dan yang parahnya lagi gue baru tau hari minggu kalo ternyata hari senin ada ulangan geografi. trus pas hari minggu itu gue lagi pergi. jadi jam 8 gue masih belom di rumah. yaudah deh guen langsung pulang, trus sampe rumah mandi dan langsung mandii. udahmana ulangannya besok susah lagi -___-"

Minggu, 14 Februari 2010

belajar coreldraw 12

selama gue make dan mengerti komputer, gue belom pernah make program yang namanya coreldraw. jangankan make, gue aja belom pernah ngeliat yang namanya program coreldraw itu kayak gimana. 

mulai kelas 9 semester 2 gue baru tau yang namanya corel draw. jadi pas masuk kelas 9 semester 2 materi pokok nya adalah menggunakan coreldraw 12. trus gue baru ngerti deh apa aja gunanya coreldraw. emang sih gue sebenrnya agak gaptek. hehe. gue ngakuin itu. pasti temen-temen gue yang lain dari dulu udah pada ngerti deh gimana cara ngeoperasiin coreldraw 12. 

tapi sebenernya jujur gue ga terlalu suka materi tik kelas 9 semester 2 ini. kan sekarang lagi diajarinnya tentang bikin poster lah, cover buku lah. itukan harus pake kreatvitas untuk menata letak kalimat-kalimat, benda-benda, pokoknya harus bikin cover buku ato poster itu semenarik mungkin. yaah gue kalo udah masalah kayak gitu paling pusing dah. pasti entar hasilnya standart banget. desainnya ga bermutu. hehe. 

Jumat, 12 Februari 2010

Langit Musik

hellooo. kira-kira 2 minggu yang lalu gue, sasha, anes, sama dilla kita semua ke acara di SCBD yang nama acaranya itu Langit Musik. jadi khasnya dari acara musik itu adalah di dalem sebuah lapangan di SCBD itu ada beberapa stage gitu, uniknya stage-stage itu ada di dalem tenda-tenda gedeeee gitu. tapi tendanya itu bening. jadi walaupun outdoor kalo ujan kita ga keujanan. trus pas udah mulai malem, kita bisa nikmatin musik tapi sambil ngeliatin langiit dan gedung-gedung mewah diluar nya.

pokoknya view nya itu kereen banget deh. trus di situ juga ada beberapa mainan gitu, kayak naik sapi-sapi an gitu trus di gjlak gjlak, tapi gue lupa namanya. trus ada juga kita diiket di lingkaran gitu, trus lingkarannya itu muter ke segala arah gitu. 

tapi gue sebenernya agak kesel juga tuh pas disana. pas lagi mau nonton maliq tiba-tiba kepala gue pusing gitu. akhirnya gue nonton maliq cuman sambil duduk gitu. kepala gue rasanya mau pingsan, takutnya kalo dipaksain berdiri nanti pusing beneran.

untung abis makan malem pusingnya ilang ternyata gue itu laper, jadi pusing deh. haha. trus sekitar jam 9-an gue dkk masuk lagi ke stage, langsung nonton RAN. waah di situ si aneh menggila deeh, dia triak triak astaaaa. ga brenti-brenti lagi. trus guekan critanya mau ngikutin anes trus gue triak : astaaa. dan apa yang terjadi. cewek disebelah gue langsung ngeliatin gue dengan pandangan sinis. kayaknbya dia ngira gue homo deh. wkwkwk. tapi seru banget deh acaranya. trus kita pulang sekitar jam 11 malem gitu deh.                                                                                                              

Minggu, 31 Januari 2010

facebook is the best


facebook kayaknya udah melekat banget ya di kalangan kita-kita ini. kayaknya kita ini kalo ga punya account di facebook udah ketinggalan jaman banget hehhe. gue dulu awalnya males banget punya fesbuk. tapi setelah berbulan-bulan gue ngeliat orang-orang pada main fesbuk gue jadi tertarik banget buat ikutan main fesbuk. trus kayaknya yang bikin fesbuk itu laris banget yaitu aplikasi-aplikasi nya yang seru-seru banget

pertama kali punya fesbuk, gue seneng banget main yang namanya Pet Society. itu game kayaknya seru banget. cuman yang punya gue mandek gitu kayaknya. soalnya duitnya ga nambah-nambah gitu. zzzz -_-. trus setelah kira-kira gue main game itu 3 bulan, tiba-tiba gue males banget maininnya. jadi sekarang gue buka fesbuk cuman buat ngeliatin status-status orang aja, sama palingan kalo ada notif baru. 

kelemahan fesbuk itu yang paling ngeselin yaitu lemotnya itu looh. kayaknya sih gara-gara kebanyakan yang make gitu. gue cuman mau buka satu foto bisa makan waktu 10 mwenit sendiri. tapi gue sekarang udah mulai jarang buka fesbuk. gara-gara gue udah mulai bosen sama fesbuk.

sempoyongan

jadi kejadian gue ini kejadian sekitar 2 minggu yang lalu. jadi gue kan baru aja selsai solat. gue solatnya sama si japut. trus si japut kan jalan dukuan di depan gue, trus gue kan mau nyeruduk japut dari belakang pake kepala (emang ga penting juga sih) trus gue tabrak tuh punggung nya japut. abis itu si japut pura-pura mau nonjok gue, sayangnya gue kesandung jadi pas dia mau nonjok gue maju nyamperin genggeman tangannya. trus JEDER tangannya japut nabrak pelipis gue. salahnya si japut adalah dia nonjok mau nonjok gue dengan pura-pura tapi kok kenceng. -_-

beberapa detik setelah tonjokkan itu, tiba-tiba mata gue blank gitu jadi item. trus jatoh. dan temen-temen gue langsung nyamperin dan berkata "hayolo japut, hayolo japut". gue tau tuh pasti si japut udah kikuk banget. gue juga mau bangun tapi susah banget masih sempoyongan. tapi akhirnya gue bisa bangun. alhamdulillah.

setelah gue bangun, si japut langsubng minta maaf-minta maaf. wkwkwk. padahal yg salah gue. trus abis itu gue sama japut langsung ke poli buat minta trombopop. trus ibu poli nanya "kenapa nak?". trus gue bingung mau jawab apa, lagian kalo gue critain yg sebenernya kan malu banget. trus japut bilang sama gue "bilang aja kejedot meja". tapi akhirnya gue memutuskan untuk ga boong. jadi gue critain deh yang sebenernya terjadi. hahaha. trus setelah kena trombopop yang dingin rasanya enaaaaak banget. cuman tetep aja. selama 3 hari kepala gue benjol dan sakit. zzzzz. pengalaman yang ga terlupakan.

Minggu, 17 Januari 2010

TUTORIAL CORALDRAW 12

Postingan kali ini gue pengen nyampein tentang Tutorial Coraldraw 12 ya. tadinya gue bingung juga tuh mau nyari tutorial nya dimana. soalnya gue nyari-nyari di google tapi agak ribet gitu, soalnya masih dalam bentuk pdf. eh tiba-tiba gue inget kalo gue punya cd nya coraldraw, di dalemnya ada juga tutorialnya yaudah langsung aja gue install. trus alhamdulillah dapet deh. mudah-mudahan bermanfaat ya tutorialnya ini. tutorial nya :
The projects you create in CorelDRAW are called drawings. In this tutorial, you will use the tools provided by CorelDRAW to create a simple drawing.
What you will learn

This tutorial introduces you to the workspace of CorelDRAW. As you practice drawing objects, you'll learn to use the following tools:

•toolbar
•toolbox
•property bar
•Help
•flyouts
•dockers
•mouse commands
You’ll also learn how to create a workspace that has customized toolbars.

Using the toolbar to start a drawingThe toolbar displays by default and contains buttons that are shortcuts to many of the menu commands.In the following procedure, you will use the toolbar to start a drawing.

1 On the toolbar, click the New button to start a new drawing.
By default, this creates a drawing page with a width of 8.5 inches and a height of 11 inches.
2 From the Zoom levels list box, choose To height.
This fits the height of the drawing page inside the drawing window.

Using a flyout to draw rectangles
The toolbox contains the tools used to create, fill, and modify your drawing. When you work in CorelDRAW, you will often need to use tools in flyouts. A flyout displays when you hold down a tool that has a small black triangle in the bottom-right corner.
Tutorial: Workspace tour
Page 2 of 9 CorelDRAW tutorial
Now, you’ll use the Rectangle flyout to draw a rectangle. CorelDRAW offers two ways to draw certain kinds of shapes, such as rectangles and ellipses: you can drag, or you can specify height and width. In this case, you’ll specify the rectangle’s height and width.
To draw a rectangle by specifying width and height
1 Open the Rectangle flyout , and click the 3 point rectangle tool .
2 Draw the width of the rectangle by dragging and then releasing the mouse button.
3 Move the mouse up until the rectangle is the height you want, and click.

Using the property bar to modify an object
The property bar is a bar with commands that relate to an active tool. For example, when you click the 3 point rectangle tool, the property bar displays commands relevant to creating and editing rectangles.
1 Specify the following dimensions in the Object(s) size boxes on the property bar:
• width — 8.5
• height — 1.4
2 Click in the drawing window.

Using the Help to add color to your rectangle
CorelDRAW has extensive Help that you can use when you are unsure how to perform a task.
In this procedure, you'll use the Help to get instructions on using a solid color as the background for your drawing.
1 Select the rectangle with the Pick tool .
2 Click Help menu 􀁠 Help topics.
3 Click the Index tab. In the box, type the word objects.
4 Click the index entry applying uniform fills to.
The procedure To apply a uniform fill displays.
5 Follow the step-by-step instructions to set the background of your drawing to a solid color.
In step 4, use the following values:
• C — 19
• M — 3
• Y — 8
• K — 0
6 Close the Help.
Tutorial: Workspace tour
Page 3 of 9 CorelDRAW tutorial

Using a flyout to remove an object’s outline
1 Select the rectangle with the Pick tool.
2 Open the Outline flyout , and click the No outline
tool .
This is what the drawing should look like:

Using the toolbox to add text
In the following procedure, you will use the toolbox’s Text tool to add text to a page. You can add two different kinds of text: artistic text and paragraph text. Artistic text is used for short blocks of text that can have effects applied to them, whereas paragraph text is used for larger blocks of text that can be extensively formatted.
1 In the toolbox, click the Text tool .
2 Click in the rectangle, and type Ipsum.
The word Ipsum displays in artistic text.
3 Above and to the left of Ipsum, drag to create a paragraph text frame, and type Lorem.
The word Lorem displays in paragraph text.
4 In the toolbox, click the Pick tool.
5Click outside the drawing page.
This deselects all objects.
To take a closer look at an object, choose the Zoom tool from the Zoom flyout in the toolbox. Click the object to zoom in. Right-click the object to zoom out.

Using the property bar to edit text properties
Here, you’ll edit the font attributes of the text in your drawing by using the property bar.
1 Select the word Ipsum using the Pick tool.
Tutorial: Workspace tour
Page 4 of 9 CorelDRAW tutorial
2 From the Font list list box on the property bar, choose Verdana.
3 From the Font size list box , choose 24.
4 Click the Italic button on the property bar.
If the text moves off the page, reposition it by using the Pick tool to select the object and drag it.
5 Select the paragraph text frame using the Pick tool.
6 From the Font list list box, choose Verdana.
7 In the Font size list box, type 30.
8 Click outside the drawing page.
This is what the drawing should look like:

Using the property bar to spray objects
Here, you’ll spray objects on your drawing by using the tools on the property bar. You’ll add fish and bubbles to your drawing.
To spray a fish
1 Open the Curve flyout, and click the Artistic media tool .
2 On the property bar, click the Sprayer button .
3 From the Spraylist file list , choose goldfish.
4 In the Size of object(s) to be sprayed box , type 90.
5 From the Choice of spray order list box , choose Sequentially.
6 Click the Spraylist dialog button on the property bar to open the Create playlist dialog
box.
7 Choose Image 8 from the Playlist list.
8 Click the up arrow until Image 8 is at the top of the Playlist list.
9 Click OK.
Tutorial: Workspace tour
Page 5 of 9 CorelDRAW tutorial
10 Drag to draw a short line on the right side of the rectangle.
11 Click outside the drawing page to deselect.
To spray bubbles
1 Open the Curve flyout, and click the Artistic media tool.
2 On the property bar, click the Sprayer button.
3 From the Spraylist file list , choose bubbles.
4 In the Size of object(s) to be sprayed box, type 80 in the upper box and 99 in the lower box.
5 From the Choice of spray order list box, choose Sequentially.
6 Drag to draw a vertical line from the top of the drawing page to the bottom.

7 Using the Pick tool, resize the bubbles to be approximately the same size as the distance
between the fish and the top of the rectangle.
You can resize an object by dragging its corner handles.
8 Using the Pick tool, move the bubbles between the fish and the top of the rectangle.
9 Click outside the drawing page to deselect.
This is what the drawing should look like:

Using a flyout to draw curved lines
CorelDRAW lets you draw all kinds of different lines, from curved or straight lines to calligraphic lines.
Next, you'll add seaweed to your drawing using the Curve flyout. You’ll draw two different types of curved lines: a freehand line and a polyline. To draw a freehand line, you drag the mouse. To draw a polyline, you drag the mouse to preview the line before you actually draw it.
To draw a curved line
1 Open the Curve flyout , and click the Freehand tool .
2 From the Outline style selector list box on the property bar, choose a dashed line style.
3 In the Outline pen dialog box, enable the Graphic check box.
4 Click OK.
5 From the Outline width list box on the property bar, choose 1.0 pt.
Tutorial: Workspace tour
Page 6 of 9 CorelDRAW tutorial
6 In the Outline pen dialog box, enable the Graphic check box.
7 Click OK.
8 Drag across the drawing page from the left side of the fish to the center and bottom of the
rectangle.
9 Click the Pick tool.
10 Click outside the drawing page to deselect.
This is what the drawing should look like:
To draw a curved line using the Polyline tool
1 Open the Curve flyout, and click the Polyline tool .
2 From the Outline style selector list box, choose a solid line style.
3 In the Outline pen dialog box, enable the Graphic check box.
4 Click OK.
5 Drag to create a vertical wavy line from the bottom of the rectangle to the top.
6 Double-click to set the line.
7 Repeat steps 1 to 6 to add more seaweed to the rectangle.

Using a docker to edit object properties
Dockers offer another convenient way to edit graphics. They contain the same kinds of controls found in dialog boxes, such as buttons, options, and list boxes. However, unlike most dialog boxes, you can keep dockers open as you work.
Now, you’ll use the Artistic media docker to add brush strokes to your drawing.
1 Click Window menu 􀁠 Dockers 􀁠 Artistic media.
The Artistic media docker opens.
2 Select one of the wavy seaweed lines with the Pick tool.
3 Open the Curve flyout, and click the Artistic media tool.
4 Click the Preset button on the property bar.
5 In the Artistic media tool width list box , type 0.1.
6 In the Artistic media docker, choose the fifth stroke from the top from the list of strokes.
Tutorial: Workspace tour
Page 7 of 9 CorelDRAW tutorial
7 From the Default CMYK palette at the right of your application window, choose Green.
8 Repeat steps 1 to 7 for each wavy line you created in To draw a curved line using the
Polyline tool.
This is what the drawing should look like:

Using mouse commands
When you right-click an object, CorelDRAW displays a context-sensitive menu. You can use the menu to alter the properties of the object.
Next, you will access the context-sensitive menu to modify the text in your drawing.
To alter text properties using mouse commands
1 Click the Pick tool.
2 Right-click the word Lorem.
The menu for paragraph text displays.
3 Click Convert to artistic text.
The artistic text Lorem converts to artistic text.
4 Right-click the word Ipsum.
The menu for artistic text displays.
5 Click Convert to paragraph text.
The paragraph text Ipsum converts to paragraph text.
6 Close the Object properties docker.
This is what the drawing should look like:
Tutorial: Workspace tour
Page 8 of 9 CorelDRAW tutorial
Creating a workspace
A workspace is a configuration of settings that specifies how the various toolbars, menus, and buttons are arranged when you are using the application. You can create a workspace to suit your needs, or to help you complete certain tasks.
Here, you will create a workspace and customize toolbars for it.
To create a workspace
1 Click Tools menu 􀁠 Options.
2 In the list of categories, click Workspace.
3 Click New.
4 In the Name of new workspace box in the New workspace dialog box, type custom1.
5 From the Base new workspace on list box, choose _default.
6 Enable the Set as current workspace check box.
7 Click OK.
You have now created your own workspace. Next, you will customize it.
To customize the toolbar
1 In the list of Workspace categories, click Customization, and click Command bars.
2 Enable the Standard check box.
3 In the list of categories, click Commands.
4 From the list box, choose All (show all items).
5 Drag the Properties icon to the toolbar in the application window, placing it between the
Open icon and the Save icon .
6 Drag the Treat as filled icon to the toolbar in the application window, placing it between the
Import icon and the Export icon .
7 In the dialog box, click OK.
Now, when you click the Properties button, it will open or close the Object properties docker. When you click the Treat as filled button, it will change the way that CorelDRAW selects objects that have no fill.
This is what the toolbar should look like:
To create a new toolbar
1 Click Tools menu 􀁠 Customization.
Tutorial: Workspace tour
Page 9 of 9 CorelDRAW tutorial
2 In the list of categories, click Command bars.
3 Click New, and type custom1.
4 Make sure that the check box beside custom1 is enabled.
A new toolbar displays in the application window.
5 In the list of categories, click Commands.
6 From the list box, choose Text.
7 Drag the Increase kerning icon to the custom toolbar in the application window.
8 Drag the Decrease kerning icon to the custom toolbar in the application window.
9 In the dialog box, click OK.
This is what the toolbar should look like:
10 To dock the toolbar, click the toolbar border, and drag the toolbar to the edge of the application
window until the toolbar changes shape.
Now, when you select text using the Text tool, you will be able to adjust the kerning.
You have now customized your workspace. Next, you will restore the default workspace.
To restore the default workspace
1 Click Tools menu 􀁠 Options.
2 In the list of categories, click Workspace.
3 In the Workspaces available list, enable the check box beside V12 default workspace.
4 In the dialog box, click OK.
From here...
You can explore CorelDRAW on your own, or you can become productive quickly by following other CorelTUTOR™ tutorials.
If you are just learning CorelDRAW, type getting started on the Search page of the Help. The Getting Started section will introduce you to the essentials of CorelDRAW and help you set up your workspace.